Mittwoch, 20. März 2013

Finishing the Paletti SSP

This is the second part of the final assembly of my Paletti SSP

Put the brake levers on the bar


Measured the length of the bowden cables, cut and assembled them.


And this is it! Here's the finished product:



Update:
The bike runs great. Very smooth and reacts very well! In the meantime, I changed the first assembled to a Campagnolo aero seatpost which fits the Paletti perfectly!

I know, it's a little bit short but hey, it looks just great!

Mittwoch, 30. Januar 2013

Assembling the Paletti SSP

Here I wanna document the assembling process of my new paletti frame.

First, the setup:
But before I began to assemble, I changed the old axis and nuts against a newer ones including Miche track nuts.
Then I started with the frame (without fork)
To measure the length of the steerer tube, first, you have to press the headset cups in the frame. I did not have to face the steerer tube ends because they were prepared (as well as the bottom bracket shell was faced).
Result:


 Here you can see the fork with the unprepared crown race seat.


With  a crownace cutter you cut down the crown to the measure of your headset crown ring.


 In the process of cutting the crown.

 Result: Cutted Crown.
After that, I had to mount the headset crown ring to the fork's crown. Tool: Crown race fitting tool.
 In the process of mounting the ring on the crown.
After that, I could assemble fork and headsets to the frame.
I used a headset/bottom bracket wrench and a monkey wrench.
Installing the stem and handlebar.
Tool: Allen key 4,5 and 6.
After that, I could turn over the bottom bracket shell.
Bottom bracket:
(Actually, this is not the one I installed. This purposes just for showing a bottom bracket.)

To install a bottom bracket, you need special tools, depending on various forms of bottom bracket cups.

For this I needed this bottom bracket tool:
Installed bottom bracket with one side of the crank set. Also assembled: wheels.



Sonntag, 20. Januar 2013

Kurbel: zweite Kettenblattaufnahme abgrinden

Um eine cleanere Optik zu erlangen, wollte ich die Aufnahme für eine zweites (kleines) Kettenblatt an der Kurbel abschleifen. Ich fahre nur ein Blatt (Singlespeed). Deshalb kann die andere Aufnahme glatt geschliffen werden. Dies wird mit dem Dremel passieren.

Hier mal Bilder, um sehen, worum es geht:




Arm (insgesamt 5) für die Aufnahme eines Kettenblatts (Rückansicht)


Draufsicht: rechts ist die Aufnahme für mein Kettenblatt. links für ein weiteres, das ich aber nicht benötige (Singlespeed)

Dremel mit den verwendeten Grindern. Man sieht, der Verschleiß war groß (ein Grinder pro Aufnahme).

Zwischenstand (links abgeschliffen, rechts noch mit Aufnahme)

Noch nicht ganz fertig (man sieht noch einen winzigen Überstand an der linken Seite)

Kurbel fertig, aber unmontiert.

Kurbel wieder montiert.



Voilà.